System
#0
Har I set denne stepping før:
AXDA1700DUT3C KIXIB 0339SPM
Jeg har ihvertfald aldrig hørt om den. Er den noget værd?
AXDA1700DUT3C KIXIB 0339SPM
Jeg har ihvertfald aldrig hørt om den. Er den noget værd?
#2
google det... eller søg her på siden
/Ash
/Ash
#3
http://forums.devhardware.com/...
Tbred A = 2000-2100mhz
Tbred B JIUCB =2100-2200mhz
JIUHB =up to 2300mhz (DUT3C)
JIUHB =up to 2500mhz (DLT3C)
Er det ik den?
Ellers lidt læse guf:
http://forums.devhardware.com/...
http://forums.devhardware.com/...
Tbred A = 2000-2100mhz
Tbred B JIUCB =2100-2200mhz
JIUHB =up to 2300mhz (DUT3C)
JIUHB =up to 2500mhz (DLT3C)
Er det ik den?
Ellers lidt læse guf:
http://forums.devhardware.com/...
http://forums.devhardware.com/...
#4
<i>Redigeret...</i>
steppingen er ikke DUT3C.. det de bogstaver betyder er bare noget om: max die temp, vcore, package, fsb... altså cpu'ens egenskaber..
steppingen er KIXIB, og det er jo det der er interessant. den skulle oc'e rigtig godt, problemet er bare den er multiplier-låst. eller der er i hvert fald mange gangefaktorer den ikke vil køre.
steppingen er ikke DUT3C.. det de bogstaver betyder er bare noget om: max die temp, vcore, package, fsb... altså cpu'ens egenskaber..
steppingen er KIXIB, og det er jo det der er interessant. den skulle oc'e rigtig godt, problemet er bare den er multiplier-låst. eller der er i hvert fald mange gangefaktorer den ikke vil køre.
#5
Det ser ikke alt for godt ud, inde på overclockers.com skriver en:
"The XP1700+ KIXIB 0339SPM I received is locked. The NF7 MB is new to me so I'm learning - but can't get above 141FSB (1553MHz CPU).
MB NF7
RAM is Mushin LVL II PC3200.
Temps are 28C/40C
Vcore @ 1.6v (running Prime95)
CPU Interface Enabled
Ram set at 2-2-2-11.
Spread Spec all disabled
APIC disabled
Power Supply is a DELTA 350W (probabality not to good, DOES NOT HAVE -5v)
Have NOT done the L12 bridge yet.....
(did Prime at 140FSB for 15+hours)
Not sure where to go from here, still reading the forum"
En anden skriver:
"
AXDA1700DUT3C
KIXIB 0339MPM
Multiplier is unlocked. (red. HAN MENER LOCKED)
However, I got up to 2.3g (210x11) with a Thermalright 800u and a 2200rpm fan, but Prime95 gets errors. Prime95 ran stable for 55hrs at 2.2g and 1.8v.
Becase both are locked, if I had to choose now, I would get the 1700+ over the 1800+ KIXIB, b/c if you bump up the FSB to 200mhz, you are at a good 2.2g. With the 1800+ at 200fsb you are running 2.3g. 11x VS. 11.5x. So if both are locked, the 1700+ is the more favorable of the 2, imho. I might consider replacing my 0319WMPW JIUHB with this KIXIB. Too bad they are sold out, I would buy more."
Læs mere her:
http://www.ocforums.com/showth...
"The XP1700+ KIXIB 0339SPM I received is locked. The NF7 MB is new to me so I'm learning - but can't get above 141FSB (1553MHz CPU).
MB NF7
RAM is Mushin LVL II PC3200.
Temps are 28C/40C
Vcore @ 1.6v (running Prime95)
CPU Interface Enabled
Ram set at 2-2-2-11.
Spread Spec all disabled
APIC disabled
Power Supply is a DELTA 350W (probabality not to good, DOES NOT HAVE -5v)
Have NOT done the L12 bridge yet.....
(did Prime at 140FSB for 15+hours)
Not sure where to go from here, still reading the forum"
En anden skriver:
"
AXDA1700DUT3C
KIXIB 0339MPM
Multiplier is unlocked. (red. HAN MENER LOCKED)
However, I got up to 2.3g (210x11) with a Thermalright 800u and a 2200rpm fan, but Prime95 gets errors. Prime95 ran stable for 55hrs at 2.2g and 1.8v.
Becase both are locked, if I had to choose now, I would get the 1700+ over the 1800+ KIXIB, b/c if you bump up the FSB to 200mhz, you are at a good 2.2g. With the 1800+ at 200fsb you are running 2.3g. 11x VS. 11.5x. So if both are locked, the 1700+ is the more favorable of the 2, imho. I might consider replacing my 0319WMPW JIUHB with this KIXIB. Too bad they are sold out, I would buy more."
Læs mere her:
http://www.ocforums.com/showth...
#6
findes der ikke et program der kan se ens hele stepping?? gider næsten ikke pille min køler af, for at se...
#7
10# ikk så vidt jeg ved, du må gøre det på den hårde måde :p
#8
Er alle AMD'er der bliver lavet nu ikke låst??
Det har jeg hørt, da AMD har underskud...?
Det har jeg hørt, da AMD har underskud...?
#9
jeg mener også at alle AMD CPU'er der forlader fabrikken har låst multiplier nu...
At det skulle være fordi AMD har underskud kan jeg så ikke forstå... det har de (ifølge den kilde jeg så) haft i 9 kvartaler i streg nu...
At det skulle være fordi AMD har underskud kan jeg så ikke forstå... det har de (ifølge den kilde jeg så) haft i 9 kvartaler i streg nu...