#1
Her http://downloadfinder.intel.co... vælg dit OS og download.
Der skulle gerne være en Readme fil med i pakken, læs den og du er godt på vej.
Der skulle gerne være en Readme fil med i pakken, læs den og du er godt på vej.
#2
kunne ikke have sagt det bedre ind Mighty_Mike :e
#3
Rettelse! Ser ud til at linket ikke virker :(
Hold musen over Support & Downloads -> vælg download center i menuen -> Skriv Intel D875PBZ i søge feltet -> tryk på linket der kommer -> så skulle du være der hvor du kan vælge OS :e
God fornøjelse!
Hold musen over Support & Downloads -> vælg download center i menuen -> Skriv Intel D875PBZ i søge feltet -> tryk på linket der kommer -> så skulle du være der hvor du kan vælge OS :e
God fornøjelse!
#4
hmmmmmmmm tilsyneladende kan jeg godt boot på en diskette, og få den til at kører en dims kernel noget....... ehm men den flasher ik bios og updatere til standart blå..... pt har jeg en phoenix bios, som er låst ( dvs, kan ik lege med mhz osv.... ) håber der er nogen der kan hjælpe
#5
Har du lagt alle filer over på disketten?
Læst readme filen hvor der står hvad du skal gøre?
Læst readme filen hvor der står hvad du skal gøre?
#7
hmmmmmmmmm tror det er fordi jeg ik fatter readme'en :D nogen der kan hjælpe mig ?
BIOS Upgrade Instructions
-------------------------
The temporary directory should contain the following four files:
README {this file}
RUN.BAT
LICENSE.TXT
DESCRIP.TXT
If all these files are not present, try extracting the downloaded
BIOS file again.
Upgrading to the Latest BIOS
-----------------------------
1. Enter BIOS SETUP by pressing F2 repeatedly after booting the
system.
2. Write down all settings that are unique to the system. These
settings will be needed later to reconfigure the system.
Additionally you can highlight the exit menu and choose the
'Save Custom Defaults' tab. Choosing 'Yes' will cause
the current BIOS settings to be saved as a custom default
setting. When the CMOS memory is cleared during the BIOS
Update, BIOS reads the custom defaults. If the custom
defaults are not saved, the BIOS will read the factory
defaults. Press ESC to exit BIOS.
3. After booting the operating system, be sure to verify that you
have downloaded the correct BIOS.
4. Double click the Run.bat program. Place a blank floppy in drive
a: when instructed. The Run.bat program will automatically
format and create a bootable floppy and copy the BIOS files
onto the floppy.
IMPORTANT Microsoft* WINDOWS* 98 SE users. After creating the diskette
you will initially not be able to view the contents of the diskette
through Windows* Explorer or through the A: drive on the desktop.
To view the contents you will have to eject the diskette and reinsert.
Only then will the BIOS files be accessible through Windows* Explorer
or through the A: drive on the desktop.
5. Place the bootable floppy containing the new BIOS into drive
a: of the system to be upgraded and boot the system.
6. During the BIOS update, you will be given one opportunity to
cancel the BIOS update without any changes occurring to
your system. To do this, simply press CTRL+Break when prompted.
IMPORTANT!
Do not press CTRL+Break or power down your system at any other
time during the BIOS update, this could permanently damage
your system.
7. When prompted that the BIOS Update is complete, remove the
floppy and reboot the system.
8. Press F2 repeatedly during post to enter BIOS SETUP. On the first screen
within SETUP, check the BIOS version to ensure that it is
the new version.
9. If you saved the settings as custom defaults, those settings
will automatically appear now. If the system has unique settings that
you did not save by choosing 'Save Custom Defaults, re-enter
those settings now. Press F10 to save the values and exit
Setup.
BIOS Upgrade Instructions
-------------------------
The temporary directory should contain the following four files:
README {this file}
RUN.BAT
LICENSE.TXT
DESCRIP.TXT
If all these files are not present, try extracting the downloaded
BIOS file again.
Upgrading to the Latest BIOS
-----------------------------
1. Enter BIOS SETUP by pressing F2 repeatedly after booting the
system.
2. Write down all settings that are unique to the system. These
settings will be needed later to reconfigure the system.
Additionally you can highlight the exit menu and choose the
'Save Custom Defaults' tab. Choosing 'Yes' will cause
the current BIOS settings to be saved as a custom default
setting. When the CMOS memory is cleared during the BIOS
Update, BIOS reads the custom defaults. If the custom
defaults are not saved, the BIOS will read the factory
defaults. Press ESC to exit BIOS.
3. After booting the operating system, be sure to verify that you
have downloaded the correct BIOS.
4. Double click the Run.bat program. Place a blank floppy in drive
a: when instructed. The Run.bat program will automatically
format and create a bootable floppy and copy the BIOS files
onto the floppy.
IMPORTANT Microsoft* WINDOWS* 98 SE users. After creating the diskette
you will initially not be able to view the contents of the diskette
through Windows* Explorer or through the A: drive on the desktop.
To view the contents you will have to eject the diskette and reinsert.
Only then will the BIOS files be accessible through Windows* Explorer
or through the A: drive on the desktop.
5. Place the bootable floppy containing the new BIOS into drive
a: of the system to be upgraded and boot the system.
6. During the BIOS update, you will be given one opportunity to
cancel the BIOS update without any changes occurring to
your system. To do this, simply press CTRL+Break when prompted.
IMPORTANT!
Do not press CTRL+Break or power down your system at any other
time during the BIOS update, this could permanently damage
your system.
7. When prompted that the BIOS Update is complete, remove the
floppy and reboot the system.
8. Press F2 repeatedly during post to enter BIOS SETUP. On the first screen
within SETUP, check the BIOS version to ensure that it is
the new version.
9. If you saved the settings as custom defaults, those settings
will automatically appear now. If the system has unique settings that
you did not save by choosing 'Save Custom Defaults, re-enter
those settings now. Press F10 to save the values and exit
Setup.