Nogen der sidder med et Asus P5KC
Overclocking d. 17. februar. 2008, skrevet af nitrotg
Vist: 252 gange.
nitrotg
#0
Hvis der er en der er kommet langt med oc med dette så lad lige hører fra dig..
#1
Jeg har et P5KC, med en E6400 som jeg har oced til 2,7. std 2,14
#2
Ok.. har du fundet nogen steder hvor du kan se hvad der skal slåes til og fra i bios af deres hjælpe midler
#3
#2 --> De fleste ting skal slåes fra, hvis jeg ikke tager meget fejl. Ting som EIST og speedstep er så vidt jeg ved kun til mere gene end gavn under overclocking. Ellers søg på nettet?
Taget herfra:
http://forums.hexus.net/hexus-...
CPU Ratio Control - This just lets you choose the Multi, you can also do this on the main Jumperfree BIOS settings page.
C1E Support - Disable this, it just isn't needed when overclocking.
Max CPUID Limit - Disable this, its for older P4 CPUs with Hyperthreading, and older operating systems.
Vanderpool Technology - Disable this, unless you specifically need it, find out if you do, by clicking here.
CPU TM Function - Disable this. I can find no use for this with C2D, apparently it was to throttle older P4 Prescott CPUs. I have always disabled it on every C2D board with no problems whatsoever.
Execute Disable Bit - I generally disable this, but it is up to you. If you experience instability with it enabled, try disabling it. You can find out more here.
PECI - I usually disable this. I have tested this with several CPUs and have been unable to find any use for it. Enabled/Disabled doesn't affect my temps in any way, and no throttling occurs. If anyone knows any different, please let me know.
Intel ® SpeedStep (TM) Tech - Disable this, generally, it doesn't play nicely with overclocking.
Taget herfra:
http://forums.hexus.net/hexus-...
CPU Ratio Control - This just lets you choose the Multi, you can also do this on the main Jumperfree BIOS settings page.
C1E Support - Disable this, it just isn't needed when overclocking.
Max CPUID Limit - Disable this, its for older P4 CPUs with Hyperthreading, and older operating systems.
Vanderpool Technology - Disable this, unless you specifically need it, find out if you do, by clicking here.
CPU TM Function - Disable this. I can find no use for this with C2D, apparently it was to throttle older P4 Prescott CPUs. I have always disabled it on every C2D board with no problems whatsoever.
Execute Disable Bit - I generally disable this, but it is up to you. If you experience instability with it enabled, try disabling it. You can find out more here.
PECI - I usually disable this. I have tested this with several CPUs and have been unable to find any use for it. Enabled/Disabled doesn't affect my temps in any way, and no throttling occurs. If anyone knows any different, please let me know.
Intel ® SpeedStep (TM) Tech - Disable this, generally, it doesn't play nicely with overclocking.