Brydebøl
#0
HEy
Jeg er ved at lave en billig computer der alligevel har lidt power i sig.
Jeg har indtil videre:
CPU: Pentium Dual Core E2160 - 389 kr.
RAM: Corsair XMS2 DHX 2 x 2 GB - 590 kr.
Jeg mangler er et bundkort .
De krav jeg har til til det bundkort er at det skal kunne være godt at overclocke på da jeg vil overclocke cpu'en til min. 3 Ghz.
Jeg har i forvejen en strømforsyning på 550 Watt og et BFG 8800 GTS 320 mb det skal køre sammen med.
Mit budget til bundkort er 700-800 kr.
Jeg er ved at lave en billig computer der alligevel har lidt power i sig.
Jeg har indtil videre:
CPU: Pentium Dual Core E2160 - 389 kr.
RAM: Corsair XMS2 DHX 2 x 2 GB - 590 kr.
Jeg mangler er et bundkort .
De krav jeg har til til det bundkort er at det skal kunne være godt at overclocke på da jeg vil overclocke cpu'en til min. 3 Ghz.
Jeg har i forvejen en strømforsyning på 550 Watt og et BFG 8800 GTS 320 mb det skal køre sammen med.
Mit budget til bundkort er 700-800 kr.
#1
ABIT IP35-E
http://edbpriser.dk/Products/L...
599 kr.
"This board overclocks a little better than the Asus P5B Deluxe...at least with my E4300. Only need to bump up Vcore, Vdimm, and change memory divider to 1:1.25 (Kingston DDR2 800 ValueRam @ 477MHz 5-4-4-12-2T 1.95Vdimm). Chip is stable at 3.58GHz (398x9) with 1.505Vcore. Vcore in CPUz is 0.02V lower than BIOS. Vdroop is 0.02V. No FSB hole between 200 and 425MHz. My 800MHz FSB chip would not boot above 425MHz FSB with lower multiplier, but I'm sure that this board is capable of driving the E63xx chip to at least 480MHz FSB."
"This is a 4-phase P35/ICH9 board will full support of 1333MHz FSB, capable of keeping up with the 8-phase Asus P5B Deluxe. One JMicro JMB368 PATA port on the PCI-E, 4 SATA 3Gb/s ports just above the floppy connector in a 2 x 2 layout. One LED for power, one LED for standby. No 1394. No RAID."
Mere her: http://forums.anandtech.com/me...
Mvh. Mads 🙂
http://edbpriser.dk/Products/L...
599 kr.
"This board overclocks a little better than the Asus P5B Deluxe...at least with my E4300. Only need to bump up Vcore, Vdimm, and change memory divider to 1:1.25 (Kingston DDR2 800 ValueRam @ 477MHz 5-4-4-12-2T 1.95Vdimm). Chip is stable at 3.58GHz (398x9) with 1.505Vcore. Vcore in CPUz is 0.02V lower than BIOS. Vdroop is 0.02V. No FSB hole between 200 and 425MHz. My 800MHz FSB chip would not boot above 425MHz FSB with lower multiplier, but I'm sure that this board is capable of driving the E63xx chip to at least 480MHz FSB."
"This is a 4-phase P35/ICH9 board will full support of 1333MHz FSB, capable of keeping up with the 8-phase Asus P5B Deluxe. One JMicro JMB368 PATA port on the PCI-E, 4 SATA 3Gb/s ports just above the floppy connector in a 2 x 2 layout. One LED for power, one LED for standby. No 1394. No RAID."
Mere her: http://forums.anandtech.com/me...
Mvh. Mads 🙂