Hjælp til OC af min I5-2500k. Bundk. Asus p8z68-V PRO GEN
Overclocking d. 06. februar. 2013, skrevet af ovdal79
Vist: 2429 gange.
ovdal79
#0
Hej alle. Jeg har nu forsøgt at OC min cpu, men men, når jeg ændre værdierne som her:
Ai Tweaker
Ai Overclock Tuner: Manual
BLCK/PCIE Frequency: 100.0
Turbo Ratio: By All Cores
By All Cores: 48
Internal PLL Voltage: Disabled
Memory Frequency: use the rated speed for your memory
DRAM Timing Control: use the rated timings for your memory
EPU Power Saving MODE: Disabled
Ai Tweaker\ CPU Power Management >
CPU Ratio: Auto
Enhanced Intel SpeedStep Technology: Enabled
Turbo Mode: Enabled
Long Duration Power Limit: Auto
Long Duration Maintained: Auto
Short Duration Power Limit: Auto
Additional Turbo Voltage: Auto
Primary Plane Current Limit: Auto
Ai Tweaker (in the DIGI+ VRM section)
Load-Line Calibration: Ultra High
VRM Frequency: Manual
VRM Fixed Frequency Mode: 350
Phase Control: Extreme
Duty Control: Extreme
CPU Current Capability: 140%
CPU Voltage: Offset Mode
Offset Mode Sign: +
CPU Offset Voltage: 0.040V
DRAM Voltage: use the rated voltage for your memory
VCCSA Voltage: Auto
VCCIO Voltage: Auto
CPU PLL Voltage: Auto
PCH Voltage: Auto
CPU Spread Spectrum: Enabled
Advanced\ CPU Configuration >
CPU Ratio: Auto
Intel Adaptive Thermal Monitor: Enabled
Active Processor Cores: All
Limit CPUID Maximum: Disabled
Execute Disable Bit: Enabled
Intel Virtualization Technology: Disabled
Enhanced Intel SpeedStep Technology: Enabled
Turbo Mode: Enabled
CPU C1E: Enabled
CPU C3 Report: Disabled
CPU C6 Report: Disabled
Og trykker save and reset ( ved ikke hvorfor det ikke hedder save and exit ) så sker der ingen ændring ☹ what to do?
Ai Tweaker
Ai Overclock Tuner: Manual
BLCK/PCIE Frequency: 100.0
Turbo Ratio: By All Cores
By All Cores: 48
Internal PLL Voltage: Disabled
Memory Frequency: use the rated speed for your memory
DRAM Timing Control: use the rated timings for your memory
EPU Power Saving MODE: Disabled
Ai Tweaker\ CPU Power Management >
CPU Ratio: Auto
Enhanced Intel SpeedStep Technology: Enabled
Turbo Mode: Enabled
Long Duration Power Limit: Auto
Long Duration Maintained: Auto
Short Duration Power Limit: Auto
Additional Turbo Voltage: Auto
Primary Plane Current Limit: Auto
Ai Tweaker (in the DIGI+ VRM section)
Load-Line Calibration: Ultra High
VRM Frequency: Manual
VRM Fixed Frequency Mode: 350
Phase Control: Extreme
Duty Control: Extreme
CPU Current Capability: 140%
CPU Voltage: Offset Mode
Offset Mode Sign: +
CPU Offset Voltage: 0.040V
DRAM Voltage: use the rated voltage for your memory
VCCSA Voltage: Auto
VCCIO Voltage: Auto
CPU PLL Voltage: Auto
PCH Voltage: Auto
CPU Spread Spectrum: Enabled
Advanced\ CPU Configuration >
CPU Ratio: Auto
Intel Adaptive Thermal Monitor: Enabled
Active Processor Cores: All
Limit CPUID Maximum: Disabled
Execute Disable Bit: Enabled
Intel Virtualization Technology: Disabled
Enhanced Intel SpeedStep Technology: Enabled
Turbo Mode: Enabled
CPU C1E: Enabled
CPU C3 Report: Disabled
CPU C6 Report: Disabled
Og trykker save and reset ( ved ikke hvorfor det ikke hedder save and exit ) så sker der ingen ændring ☹ what to do?
#1
Hva er det helt præcist du har ændret?
#2
Ai Overclock Tuner: Manual. fra auto
By All Cores: 48. fra 40
Memory Frequency: 1600Mhz fra auto
DRAM Timing Control:1600Mhz fra auto
Load-Line Calibration: Ultra High. fra normal
VRM Fixed Frequency Mode: 350. fra 100
Phase Control: Extreme. fra normal
Duty Control: Extreme. fra normal
CPU Current Capability: 140%. fra 100%
CPU Offset Voltage: 0.040V
By All Cores: 48. fra 40
Memory Frequency: 1600Mhz fra auto
DRAM Timing Control:1600Mhz fra auto
Load-Line Calibration: Ultra High. fra normal
VRM Fixed Frequency Mode: 350. fra 100
Phase Control: Extreme. fra normal
Duty Control: Extreme. fra normal
CPU Current Capability: 140%. fra 100%
CPU Offset Voltage: 0.040V
#3
jeg aner ikke hva alle de ting betyder.. kan du ikke nøjes med af ændre multiplieren?
#5
har du prøvet af slå turbo mode fra?
#6
Internal PLL Voltage: Enabled
CPU Spread Spectrum: Disabled
OC med Offset voltage er ret tricky. Prøv med manuel voltage. Har du god luftkøling kan du nok arbejde i omegnen af 1,400v. (så vidt jeg husker).
Brug Turbo mode til OC (som du allerede gør).
Svaret blev redigeret 1 gang, sidst af Illuminati d. 06-02-2013 20:58:49.
CPU Spread Spectrum: Disabled
OC med Offset voltage er ret tricky. Prøv med manuel voltage. Har du god luftkøling kan du nok arbejde i omegnen af 1,400v. (så vidt jeg husker).
Brug Turbo mode til OC (som du allerede gør).
Svaret blev redigeret 1 gang, sidst af Illuminati d. 06-02-2013 20:58:49.