Sven Bent
#0
jeg er ved at lave min 2nd omgang af et test CPU stress test programmer og kunne bruge lidt bud til hvilke folk ville oenske at se testet og/elelr elelrs kan anbeafle
PT bruger jeg fogelden
PRime95 (Small,blend, 8-8-30)
OCCT ( egen samt linpackAVX)
AVX (enkelt koersle, dlbt kortsle emd affinity styring)
Asus realbench
intel XTU
Passmark buring
Aida64 extreme burinin
PT bruger jeg fogelden
PRime95 (Small,blend, 8-8-30)
OCCT ( egen samt linpackAVX)
AVX (enkelt koersle, dlbt kortsle emd affinity styring)
Asus realbench
intel XTU
Passmark buring
Aida64 extreme burinin
#1
Jeg bruger cinebench til hurtigt at afprøve et oc og asus realbench/GtaV til at teste stabilitet.
klarer den en time af hver, så ser jeg det som stabilt og har aldrig oplevet andet.
asus realbench er specielt god til os med vandkøling, hvor cpu og gpu er i samme loop.
Da den både stresser cpu og gpu, så får man testet maximalt varme i loopet.
klarer den en time af hver, så ser jeg det som stabilt og har aldrig oplevet andet.
asus realbench er specielt god til os med vandkøling, hvor cpu og gpu er i samme loop.
Da den både stresser cpu og gpu, så får man testet maximalt varme i loopet.
#5
OCCT til cpu/mem, heaven og spil til gfx
#6
3Dmark - firestrike stress test
battlefield 1 med alt på ultra/max
battlefield 1 med alt på ultra/max
#7
Jeg be'r min kæreste, om at sætte sig foran pc'en, det går nemlig altid galt.
Skide hård benchmark, de kvinder.
Skide hård benchmark, de kvinder.
#8
Saa jeg har umiddelbart daekket det hele.
#9
En lille forsmag paa hvad jeg gaar og roder med.
Core I7 2700K 4.4 Status temp Power
Asus RealBench OK 79-84 318w*
Aida64 Extreme OK 74-81 181w
Folding@Home OK 73-78 182w
HeavyLoad OK 72-76 184w
Handbrake 1.0.2 OK 71-76 165-177w
LinPack V11.2.2.010 OK 78-90 191-210w
LinPack x2 V11.2.2.010 OK 84-96 220w
OCCT 4.4.3 (Own/large) OK 78-88 211w
OCCT 4.4.3 (Linpack90%) OK 82-93 207-214w
PRime95 28.5 (8-8-30) OK 84-93 217w
Prime95 28.5 (small) OK 79-89 212w
Prime95 28.5 (Blend OK 82-92 215w
Passmark BurnInTest 8.1 OK 67-72 104-180w
XTU (CPU) OK 73-79 176-190w
Winrar OK 60-67 151w
7-zip OK 68-71 124-173w
* This uses OpenCL to put load on GPU as well.
Not direct comparable against other candidates
- Status indicated whatever the system passed 4hours of testing
- Peak temp are the range of the cores different peak temps
- Power is the powerdraw measured from the wall (+/-2watt)
The high temps is partly due to using a semi defective cooler on purpose.
Note that linpack was only running 4 threads. were as linpack x2 was running two instance of 4 threads and affinity controller so they would each get access to all physical cores.
Prime (8-8-30) is a custome settings of Prime95 that use size 8 for max and min fft size and running each size 30 minutters at a time (not in place)
Naeste trin er at skrue ned for volten og see om alle test gennemfore 4 timers OK.
rinse and repeats indtil alle test fejler inde for de angivet 4 timer.
Derved kan jeg nemt se hvilket software der finde fejl hurtigst
--- edit ---
Hwt mangler rimeligt meget en metode til at skrive med fixed font width.
Svaret blev redigeret 1 gang, sidst af Sven Bent d. 16-02-2017 16:12:34.
Core I7 2700K 4.4 Status temp Power
Asus RealBench OK 79-84 318w*
Aida64 Extreme OK 74-81 181w
Folding@Home OK 73-78 182w
HeavyLoad OK 72-76 184w
Handbrake 1.0.2 OK 71-76 165-177w
LinPack V11.2.2.010 OK 78-90 191-210w
LinPack x2 V11.2.2.010 OK 84-96 220w
OCCT 4.4.3 (Own/large) OK 78-88 211w
OCCT 4.4.3 (Linpack90%) OK 82-93 207-214w
PRime95 28.5 (8-8-30) OK 84-93 217w
Prime95 28.5 (small) OK 79-89 212w
Prime95 28.5 (Blend OK 82-92 215w
Passmark BurnInTest 8.1 OK 67-72 104-180w
XTU (CPU) OK 73-79 176-190w
Winrar OK 60-67 151w
7-zip OK 68-71 124-173w
* This uses OpenCL to put load on GPU as well.
Not direct comparable against other candidates
- Status indicated whatever the system passed 4hours of testing
- Peak temp are the range of the cores different peak temps
- Power is the powerdraw measured from the wall (+/-2watt)
The high temps is partly due to using a semi defective cooler on purpose.
Note that linpack was only running 4 threads. were as linpack x2 was running two instance of 4 threads and affinity controller so they would each get access to all physical cores.
Prime (8-8-30) is a custome settings of Prime95 that use size 8 for max and min fft size and running each size 30 minutters at a time (not in place)
Naeste trin er at skrue ned for volten og see om alle test gennemfore 4 timers OK.
rinse and repeats indtil alle test fejler inde for de angivet 4 timer.
Derved kan jeg nemt se hvilket software der finde fejl hurtigst
--- edit ---
Hwt mangler rimeligt meget en metode til at skrive med fixed font width.
Svaret blev redigeret 1 gang, sidst af Sven Bent d. 16-02-2017 16:12:34.