Maximus VIII Formula with black screen (Står på engelsk)
Bundkort / CPU d. 18. marts. 2017, skrevet af pawpaw291
Vist: 922 gange.
pawpaw291
#0
Hi, guys.
Hoping this community will give a lending hand with an issue of mine. Been browsing, but thus far found no advice regarding this matter: Maximus VIII Formula mobo keeps displaying a black screen, and can't even enter bios thanks to that.
I've been working on this issue the whole day, and nearly everything's ready. Thing is, I have purchased a Kaby Lake cpu, which means I'm required to update my mobo to the latest version even if it's a beta version (though, it does improve stability, or so it says).
After I flashed my mobo with the latest update, it doesn't respond; there's just a black screen with the mobo indicating no sign of errors. Granted, I can't tell for a fact that it would have been different had I used the default version since, as I mentioned above, it's either latest beta version 3101 or nothing if I am to use Kaby Lake.
How I've been attempting to fix it:
Booting up with and without a dedicated graphics card (this case, GTX 960)
switched monitor input from DP to DVI
W/ and without ram
W/ and without CPU
No hard drive or ssd has been inserted into the mobo (not really an attempt, but just a side note)
Anyhow, I'm hoping to hear some smart advice.
ninja edit: also, I reinserted cmos: nothing.
Tråden blev redigeret 4 gange, sidst af pawpaw291 d. 18-03-2017 01:02:21.
Hoping this community will give a lending hand with an issue of mine. Been browsing, but thus far found no advice regarding this matter: Maximus VIII Formula mobo keeps displaying a black screen, and can't even enter bios thanks to that.
I've been working on this issue the whole day, and nearly everything's ready. Thing is, I have purchased a Kaby Lake cpu, which means I'm required to update my mobo to the latest version even if it's a beta version (though, it does improve stability, or so it says).
After I flashed my mobo with the latest update, it doesn't respond; there's just a black screen with the mobo indicating no sign of errors. Granted, I can't tell for a fact that it would have been different had I used the default version since, as I mentioned above, it's either latest beta version 3101 or nothing if I am to use Kaby Lake.
How I've been attempting to fix it:
Booting up with and without a dedicated graphics card (this case, GTX 960)
switched monitor input from DP to DVI
W/ and without ram
W/ and without CPU
No hard drive or ssd has been inserted into the mobo (not really an attempt, but just a side note)
Anyhow, I'm hoping to hear some smart advice.
ninja edit: also, I reinserted cmos: nothing.
Tråden blev redigeret 4 gange, sidst af pawpaw291 d. 18-03-2017 01:02:21.
#1
Dansk tilbagemelding er mere end fint :)
#2
Disconnect the onboard battery and try a cmos reset again.
#3
Hi
Are you sure the BIOS update went succesfully? It could be a bricked mobo. If the mobo has dual BIOS, try changing to the second BIOS (see manual).
I assume the mobo have the ability to update BIOS since, it was possible for you doing so with a kaby lake cpu?
can you lend a skylake cpu from someone maybe and try?
Are you sure the BIOS update went succesfully? It could be a bricked mobo. If the mobo has dual BIOS, try changing to the second BIOS (see manual).
I assume the mobo have the ability to update BIOS since, it was possible for you doing so with a kaby lake cpu?
can you lend a skylake cpu from someone maybe and try?
#4
Det er svært at skifte bios, så længe der ikke kommer noget billede på skærmen. Jeg kan hverken se bios eller noget andet :/
Må prøve at finde en person med en Skylake CPU, jeg kan låne :)
Må prøve at finde en person med en Skylake CPU, jeg kan låne :)