#2
SuperbrugerTilføjet:
29-07-2010 20:38:50
Svar/Indlæg:
216 / 25
Omdømme:
0 / 0
700-800 hvis den benytte en af de gode paneler.. Der findes jo også dårlige modeller af den.
#4
SuperbrugerTilføjet:
29-07-2010 23:00:58
Svar/Indlæg:
216 / 25
Omdømme:
0 / 0
Det står bagpå. Der hvor der står model.
Der er enten A, C og S. evt google lidt på det.
Der er enten A, C og S. evt google lidt på det.
ElitebrugerTilføjet:
30-07-2010 01:43:51
Svar/Indlæg:
687 / 41
Omdømme:
0 / 0
#4 Og hvad så når der intet står? Har to stks, og ingen af dem har et bogstav efter model nummeret, der står bare "Model 226BW" 😐
#6
ModeratorTilføjet:
30-07-2010 08:52:01
Svar/Indlæg:
1368 / 102
Omdømme:
4 / 0
Du kan tilgå service menuen sådan her:
To access said panel, simply lower both the brightness and the contrast to 0 using the regular user control panel. Exit the menu, and then bring it back up again. After you have done this hold the source button down for 5 seconds. This will bring up the service menu. The panel type should be located down at the bottom underneath the Scaler-MCU entry. But Wait! It's missing! Yes, on my monitor the panel type was missing from the service menu. As it turns out this is becoming a more common occurrence in the newer revisions of this monitor. If the panel type had been there it would have started with "AU" for an "A" panel, it would probably have contained "220M1" for an "S" panel, and started with "CMO" or "CPT" for a "C" panel.
Det stod nemlig heller ikke på min. Købt igennem bj-trading. Jeg ringede for at høre om de kunne levere en med s-panel, men ham i telefonen sagde at samsung havde fjernet muligheden for at se det via labelen. Han var dog så flink at sige jeg bare kunne sende den retur, hvis det viste sig at det ikke var s-panel.
Svaret blev redigeret 1 gang, sidst af MazdaMadsen d. 30-07-2010 08:54:07.
To access said panel, simply lower both the brightness and the contrast to 0 using the regular user control panel. Exit the menu, and then bring it back up again. After you have done this hold the source button down for 5 seconds. This will bring up the service menu. The panel type should be located down at the bottom underneath the Scaler-MCU entry. But Wait! It's missing! Yes, on my monitor the panel type was missing from the service menu. As it turns out this is becoming a more common occurrence in the newer revisions of this monitor. If the panel type had been there it would have started with "AU" for an "A" panel, it would probably have contained "220M1" for an "S" panel, and started with "CMO" or "CPT" for a "C" panel.
Det stod nemlig heller ikke på min. Købt igennem bj-trading. Jeg ringede for at høre om de kunne levere en med s-panel, men ham i telefonen sagde at samsung havde fjernet muligheden for at se det via labelen. Han var dog så flink at sige jeg bare kunne sende den retur, hvis det viste sig at det ikke var s-panel.
Svaret blev redigeret 1 gang, sidst af MazdaMadsen d. 30-07-2010 08:54:07.