Kassens indhold
Liste over tilbehør / Kassens indhold :
-
Shuttle NC01U
-
Skruer
-
Stander
-
VESA holder
-
Strømforsygning
-
Strømkabel
-
Manualer
-
Driver DVD
Det er dejligt at se så stor en bundle være med som standard. Normalt skal man ud og købe sig til VESA mount. Manualen er godt nok ikke på dansk, men den er på trods af dette nem at forstå, da den er velillustreret.
Specifikationer
-
Chassis
Barebone PC with a black plastic chassis
Dimensions: 141 x 141 x 29 mm (LWH) = 577 ml
Weight: 0.36 kg net, 1.26 kg gross
Hole for Kensington Lock
Includes vertical stand and 75/100mm VESA mount
-
Low Power Consumption
Power consumption in idle mode: 5.5 W, full load: 11.6 / 22.4 W (without/with graphics)
(measured with 4 GB DDR3L SO-DIMM, 64 GB 2.5" SSD, Windows 7)
-
Operation System
This barebone system comes without operating system.
It is compatible with:
- Windows 7 (including Embedded [4]), 32- and 64-bit
- Windows 8.1 (including Embedded [4]), 32- and 64-bit
- Windows 10, 32- and 64-bit
- Linux, 32- and 64-bit (e.g. Ubuntu, OpenSUSE, Fedora)
-
Processor
Model: Intel Celeron 3205U (ULV)
System-on-a-chip architecture (SoC): no chipset required
Code name: Broadwell (5th Generation Intel Core)
Cores / Threads: 2 / 2
Clock rate: 1.5 GHz
L1/L2/L3 Cache: 128 kB / 512 kB / 2048 kB
Memory controller: DDR3L-1600 Dual Channel (1.35V)
TDP wattage: 15 W maximum
Manufacturing process: 14 nm
Maximum Tjunction Temperature: 105°C
Integrated Intel HD graphics engine
Supports 64 Bit, VT-x, VT-d, Enhanced SpeedStep, NX bit, SSE 4.1/4.2
-
Integrated Graphics
Intel HD Graphics
Clock rate: 300~800 MHz
Maximum resolution: 2560 x 1600
Execution Units (EU): 12
Two digital audio/video ports: Mini-DisplayPort 1.2 [1] and HDMI 1.4a
Supports two independent screens
Supports DirectX 11.2, OpenCL 1.3/2.0, OpenGL 4.3
Supports full AVC/VC1/MPEG2 hardware decoding
Supports HD video plus multi-channel digital audio via a single cable
Dynamic, shared memory: up to 1632 MB
-
Mainboard / BIOS
Supports resume after power failure
Supports Wake on LAN (WOL)
Supports Power on by RTC Alarm
Supports booting from USB devices and SD card reader
AMI BIOS in 8 MByte EEPROM with SPI interface
Supports hardware monitoring and watch dog function (ITE 8528E)
Supports Unified Extensible Firmware Interface (UEFI)
-
Power Adapter
External 65 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 3.42 A, max. 65 W
DC Connector: 5.5/2.5mm (outer/inner diameter)
-
Memory support
2x 204-pin SO-DIMM slot
Supports DDR3L-1333/1600 (PC3-10600/12800) SDRAM at 1.35V
Supports Dual Channel mode
Supports a maximum of 8 GB per DIMM, maximum capacity: 16 GB
Supports two unbuffered DIMM modules (no ECC)
Caution: This mainboard does only support 1.35V DDR3L memory modules.
Note: DDR3L has a lower operation voltage as DDR3
-
Slot for M.2 SSD
M.2 slot: (NGFF) type 2242, key M
Supports M.2 SSD card, key B+M, dimensions 22 x 42 mm, Serial ATA interface
Caution: SSDs with PCIe interface (M key only) are not supported
-
Audio
Audio Realtek® ALC 269Q-VC3 High-Definition Audio Codec
3.5mm / 4-pole combo audio connector for headphones and microphone [2]
Digital multi-channel audio output: via HDMI and Mini-DisplayPort
-
Gigabit LAN
Intel i218LM PHY connected to the MAC of the processor
Supports 10 / 100 / 1.000 MBit/s operation (Gigabit)
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
-
Wireless Network (WLAN)
WLAN expansion card (M.2- 2230-AE) with two internal antennas
Chip: Realtek RTL8821AE
Supports Wireless LAN IEEE 802.11b/g/n/ac 1T1R, 2,4 GHz or 5 GHz
Max. speed: 150 Mbps (2.4 GHz) or 433 Mbps (5 GHz)
Supports Bluetooth 4.0
-
2.5" Drive Bay
Supports one Serial ATA hard disk
or one SATA SSD drive in 6.35cm/2.5" format
Device height: 7 mm (max.)
Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
Note: no Serial ATA cable is required
-
Card Reader
Integrated SD card reader
Supports SD, SDHC and SDXC memory flash cards
Genesys Logic GL823-OGY08 with USB interface
Supports booting from SD card
-
Front Panel connectors
2x USB 3.0 (both support 2.0 A charging)
SD card reader (supports SD, SDHC, SDXC)
Power button
Power LED (blue, blinking in suspend mode)
HDD LED (orange)
-
Back Panel connectors
Mini-DisplayPort 1.2 [1]
HDMI 1.4a
2x USB 2.0
Gigabit LAN (RJ45)
Audio Combo Port for headphones and microphone (3.5 mm jack, 4-pole) [2]
DC-input connector for external power adapter
-
Left Side connectors
Serial RS232 COM port (D-Sub, 9-pin)
-
Supplied Accessories
Multi-language user guide
Driver DVD for Windows
VESA mount set (made of steel, with screws)
Stand for vertical operation mode
Bracket for a 2.5" drive with screws
Power adapter with AC power cord
-
Optional Expansion Kits:
(available from Q1'16 on request)
1) Graphics: AMD R7 M370 "Litho XT"
2) I/O box: 1x Gigabit LAN, 2x USB 2.0, 1x 2.5" bay (SATA 6G)
3) I/O box: 3x RS232 COM port, 1x 2.5" bay (SATA 6G)
-
TPM (Optional)
Only available upon request:
Trusted Platform Module (TPM) supports TPM 1.2 or 2.0 specifications
-
Environmental Spec
Operating temperature range: 0~50°C [3]
Relative humidity range: 10~90% (non-condensing)
-
Conformity/Certifications
EMI: FCC, CE, BSMI, C-Tick
Safety: CB, BSMI, ETL
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
[1] Mini-DisplayPort
A monitor with a standard DisplayPort can ideally be connected using an adapter cable that converts Mini-DisplayPort to DisplayPort (e.g. DELOCK 82698).
[2] Audio connector
The 3.5mm audio jack at the back panel of this device supports both a 4-pole connector for headphones and microphone and headphones with only a 3-pole connector. Headsets with separate connectors for headphones and microphone, though, require an appropriate adapter, if also the microphone should be used.
[3] High ambient temperatures
Caution: for high ambient temperature over 40°C we strongly recommend to use SSDs (supporting at least 70°C) and rugged SODIMM memory with wide temperature range (up to 95°C).
[4] Note regarding supported Windows Embedded versions:
Supports Embedded versions based on Windows 7/8:
- Windows 7 Ultimate for Embedded Systems
- Windows 7 Professional for Embedded Systems
- Windows Embedded Standard 7
- Windows Embedded POSReady 7
- Windows Embedded 8.1
- Windows Embedded 8.1 Industry
Do not support Embedded versions based on Windows XP:
- Windows XP Embedded
- Windows XP Professional for Embedded Systems
- Windows Embedded Standard 2009
- Windows Embedded POSReady 2009
- Windows Embedded for Point of Service (WEPOS)
På næste side kigger vi lidt på designet.
