Kassens indhold
Liste over tilbehør / Kassens indhold :
-
Shuttle SZ170R8
-
Strømkabel
-
4 SATA kabler
-
Driver DVD
-
12 HDD skruer
-
Kølepasta
-
Hurtigstart guides
Der er alt hvad der skal til. Manualerne er nemme at forstå og hjælper dig med hardware installationen med både tekst og illustrationer.
Specifikationer
Specifikationerne peger i retning af en alsidig barebone, som mere eller mindre kan bygges op til at være lige hvad man har lyst til. Alt lige fra en filserver til gaming PC. Der er plads til 4 3,5" harddiske, hvilket gør den til en oplagt NAS, hvis man installerer en prisbillig Celeron CPU eller en medium gaming PC, da der er plads til et stort grafikkort. Prisen er blot at man mister muligheden for at installere et PCIe X4 kort. Dermed er en SZ170R8 en barebone, der kan bygges og indrettes efter behov. Eneste minus er at der ikke er plads til 2,5" diske, men dette er der kompenseret for dels i form af en M.2 port og dels i form af ekstraudstyr med en 3,5" til 2,5" omformer.
-
Chassis
Black aluminium chassis
Front panel: brushed aluminium
Front doors for USB ports
Kensington Security Slot at the back panel (also called K-Slot
or Kensington lock) as a part of an anti-theft system
Dimensions: 33.2 x 21,6 x 19.8 cm (LWH), 14.2 litre
Weight: 3.5 kg net / 5.0 kg gross
-
Storage bays
Storage bays: 4x 3.5" (internal)
Using the optional accessory PHD3 two 2.5" drives
can be installed into one 3.5" bay.
-
Mainboard / Chipset
Shuttle "FZ170", Shuttle Form Factor
proprietary design for XPC cube Barebone SH170R6
Dimensions: 270 x 195 mm
Chipset: Intel® Z170 Chipset
(Intel® GL82Z170 PCH, code name "Sunrise Point")
Platform Controller Hub (PCH) as Single-Chip-Solution
Solid Capacitors for sensitive areas provide excellent
heat resistance for enhanced system durability
-
BIOS
AMI BIOS, SPI Interface, 32 MBit Flash-ROM with SPI interface
Supports PnP, ACPI 3.0, Hardware Monitoring
Supports Unified Extensible Firmware Interface (UEFI)
Supports boot up from external USB flash memory
-
Power supply
Built in 500 Watt mini switching power supply (PC63J)
AC input voltage: supports 100~240V, 50~60 Hz
80 PLUS Silver [9] compliant: the PSU provides at least
85/89/85% of efficiency at 20/50/100% of load.
Active PFC circuit (Power Factor Correction)
ATX main power connectors: 2x10 and 2x2 pins
Graphics power connector: 6 pins and 8 pins
Other connectors: 4x SATA, 2x Molex, 1x Floppy
-
Operation System
This system comes without operating system.
It is compatible with Windows 10 / 8.1 / 7 and Linux.- 64 bit.
For note on Windows 7, see [7]
-
Processor support
Socket LGA 1151 (H4) supports the sixth generation of
Intel Core i7 / i5 / i3, Pentium and Celeron processors
Maximum supported processor power consumption (TDP) = 95W
Codename "Skylake", 14nm process technology, up to 8 MB of L3 cache
Not compatible with Intel Xeon E3 V5 processors with Socket LGA1151 and processors with the older Socket LGA 1150.
Supports the unlock-function of Intel K-Series processors.
The processor integrates PCI-Express, memory controller
and the graphics engine on the same die (performance features
depending on processor type)
Please refer to the support list for detailed processor support information at global.shuttle.com.
-
Processor cooling
Shuttle I.C.E. (Integrated Cooling Engine)
Advanced I.C.E. Heatpipe technology with 3 pipes
Temperature controlled 92 mm fan
SilentX cooling and noise reduction technology with Active Airflow
-
Memory support
4 x 288-pin slots
Supports DDR4-2133 memory (PC4-17066) at 1.2V
Supports 2+2 Dual Channel mode
Supports max. 16 GB per DIMM, maximum total size of 64 GB
-
Integrated Graphics
The features of the integrated Intel HD graphics function
depend on the processor type used.
Supports DirectX 12, OGL 5.x, OCL 2.x
The PC features three digital video outputs [6]:
- HDMI v1.4 (supports 1080p/60 and 2160p/30)
- 2x DisplayPort v1.2 (support 1080p/60 and 2160p/60)
Supports displays with 4K Ultra HD resolution at 3840 x 2160 [3]
Supports three independent FullHD displays with the integrated graphics function
Supports more displays in combination with a discrete graphics card [2]
Supports Blu-ray (BD) playback with HDCP content protection
Supports multi-channel digital audio over the same cable
Maximum shared memory of 512 MB
-
PCIe Expansion Slots
1x PCI-Express x16 v3.0 slot (PEG, for graphics cards only)
1x PCI-Express x4 v3.0 slot
This XPC supports dual-slot (double-width) graphics cards -
in this case the second PCI-Express slot will be occupied.
Graphics power connector: 6-pin
-
M.2 SSD slot
The M.2 2280 BM slot provides the following interfaces:
- PCI-Express Gen. 3.0 X4 with up to 32 Gbps Data Transfer Speed
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SSDs with SATA or PCI-Express interface
-
Mini PCIe Slot
Mini-PCIe Half-Size slot
with PCIe 2.0 and USB 2.0 interface
supports one optional Wireless Network (WLAN) card
-
7.1-Channel HD audio
7.1 channel High Definition Audio with Realtek ALC892 codec
Analog: line-out (7.1-ch), line-in, microphone, AUX input (onboard)
Digital Audio via HDMI and DisplayPort outputs
-
Gigabit LAN
Intel i219LM PHY connected to the MAC of the processor
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
-
SATA connectors
The mainboard provides six Serial-ATA 3.0 interfaces, max. 6 Gbps supported
4x Serial ATA connector onboard
1x External Serial ATA (eSATA) connector at the back panel
1x M.2 slot onboard for flash memory cards
Supports Intel Rapid Storage Technology (RST, Raid 0/1/5/10, JBOD)
-
Front Panel Connectors and Buttons
Microphone input
Headphone output (line-out)
2x USB 3.0
Power button
Power indicator (blue LED)
Hard disk drive indicator (yellow LED)
-
Back Panel Connectors
HDMI v1.4
2x DisplayPort v1.2 [5]
6x USB 3.0
GigaBit LAN (RJ45)
External Serial ATA (eSATA 6 Gb/s)
7.1-ch Audio line-out (2x rear/front, bass/center, surround/back)
Audio Line-in
Clear CMOS button
Optional: serial port RS-232 (Accessory: H-RS232)
3x perforation for optional WLAN antennas
-
Other Onboard Connectors
2x USB 2.0 (2x 5-pin)
1x RS232 (2x 5-pin) for optional accessory H-RS232
2x fan connectors (4 pin), one connector is occupied
Low Pin Count header (LPC, 2x 10 pin, 2 mm pitch size)
Occupied front connectors: USB 3.0, USB2.0, audio, power buttons, LEDs
-
Included Accessories
Multi-language XPC Installation Guide (EN, DE, FR, ES, JP, KR, SC, TC)
32/64 bit driver disk for Windows
4x Serial ATA cables
AC Power Cord (with protective-earth contacts)
Heatsink Compound
Protector cap for the CPU socket (do not use if heat-pipe or fan is mounted)
Bag with screws
-
Optional Accessories
PHD3: 3.5" to 2.5" adapter
H-RS232: Backpanel COM port adapter for RS232 serial interface
WLN-C: Wireless LAN 802.11n module with two external antennas
WLN-P: Wireless LAN 802.11ac + BT4.0 module with two external antennas
-
Environmental Spec
Operating temperature range: 0~35°C
Relative humidity range: 10~90% (non-condensing)
-
Certifications / Compliance
EMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI
Other: RoHS, ErP 2013 Lot 3, Energy Star 5.2
-
Conformity
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
the living room or office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
På næste side kigger vi lidt på designet.