Specifikationer
3D Power fra Gigabyte er lidt ligesom Digi+ VRM moduler fra Asus. De er digitale og der er mulighed for at styre strømmen der går til CPU'en og RAM digitalt. Der er også mulighed for at styre strømfrekvensen der render til CPU og RAM.
En BIOS jeg endnu ikke har stiftet bekendtskab med er Gigabytes 3D BIOS. Efter hvad jeg har set skulle den være meget spændende med en flot grafisk interface.
Med ultra-high 32GB/s båndbredde introduceres nu PCIe 3.0, der er næste generation PCI Express standard. Der er tale om endnu en fordobling af datamængden du kan presse igennem soklen, og dermed er der åbent for udvikling af endnu hurtigere grafikkort i fremtiden. Den nye standard er naturligvis bagudkompatibel med PCIe 1.0 og 2.0.
Der er mulighed for at have op til 4 grafikkort sat til bundkortet på samme tid, både fra AMD og nVidia. Når alle pci-e pladser er optaget kører de alle x8.
Gigabyte har også valgt at levere en del mere strøm til USB porten. Hele 3 gange så meget end hvad man vil normalt. Dette giver en kæmpe kompatibilitet til stort set alle USB enheder i dag, og er en stor fordel når man vil oplade enheder via USB.
Der er to USB 3.0 porte på kortet. De skulle teoretisk være 10 gange hurtigere end almindelig USB 2.0 porte. Portene er bagudkompatible således at USB 2.0 enheder kan tilkobles disse porte også.
Vi finder også SATA 3.0 (aka SATA-600) Det giver en teoretisk hastighed på 6 GB/s og er dobbelt så hurtig som det gamle SATA 2.0 der har en teoretisk hastighed på 3 GB/s. På dette bundkort er der mulighed for RAID på SATA 3.0 portene.
Gigabyte kalder dette "On/Off charge", og dette giver mulighed for at oplade sin iPhone, iPad eller iPod via USB portene selvom at systemet er slukket helt. Det er med andre ord en USB port med konstant arbejdsspænding på.
Ultra durable 3 dækker over et dobbelt kobberlag inde i selve bundkortet, hvilket drastisk sænker system temperaturen ved at sprede varmen fra kritiske områder af bundkortet ud i hele printet. Ultra durable 3 sænker også impedans med 50% hvilket hjælper med at mindske elektrisk støj og yderligere sænke temperaturen. Til sammen giver det bedre systemstabilitet og bedre spillerum for overclocking.
CPU |
-
Support for Intel® Core™ i7 processors in the LGA2011 package package
-
L3 cache varies with CPU
(Please refer "CPU Support List" for more information.) |
Chipset |
-
Intel® X79 Express Chipset
|
Memory |
-
4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
-
4 channel memory architecture
-
Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
-
Support for non-ECC memory modules
-
Support for Extreme Memory Profile (XMP) memory modules
(Please refer "Memory Support List" for more information.) |
Audio |
-
Realtek ALC898 codec
-
High Definition Audio
-
2/4/5.1/7.1-channel
-
Support for Dolby® Home Theater
-
Support for S/PDIF Out
|
LAN |
-
1 x Intel GbE LAN (10/100/1000 Mbit)
|
Expansion Slots |
-
2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
-
2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
* The PCIEX8_2 slot shares bandwidth with the PCIEX16_2 slot. When the PCIEX8_2 slot is populated, the PCIEX16_2 slot will operate at up to x8 mode.
(All PCI Express x16 slots conform to PCI Express 3.0 standard.)
-
2 x PCI Express x1 slots
(All PCI Express x1 slots conform to PCI Express 2.0 standard.)
-
1 x PCI slot
|
Multi-Graphics Technology |
-
Support for 4-Way/3-Way/2-Way AMD CrossFireX™/NVIDIA SLI technology
* The PCIEX16 slots operate at up to x8 mode when 4-Way/3-Way AMD CrossFireX™/NVIDIA SLI is enabled.
|
Storage Interface |
Chipset:
-
2 x SATA 6Gb/s connectors (SATA3 0/1) supporting up to 2 SATA 6Gb/s devices
-
4 x SATA 3Gb/s connectors (SATA2 2/3/4/5) supporting up to 4 SATA 3Gb/s devices
-
Support for RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.
3 x Marvell 88SE9172 chips:
-
4 x SATA 6Gb/s connectors (GSATA3 6/7/8/9) supporting up to 4 SATA 6Gb/s devices
-
2 x eSATA 6Gb/s connectors on the back panel, supporting up to 2 SATA 6Gb/s devices
-
Support for RAID 0 and RAID 1
|
USB |
Chipset:
-
Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available through the internal USB headers)
2 x Fresco FL1009 chips:
-
Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
|
Internal I/O Connectors |
-
1 x 24-pin ATX main power connector
-
1 x 8-pin ATX 12V power connector
-
6 x SATA 6Gb/s connectors
-
4 x SATA 3Gb/s connectors
-
1 x CPU fan header
-
4 x system fan headers
-
1 x front panel header
-
1 x front panel audio header
-
1 x S/PDIF Out header
-
3 x USB 2.0/1.1 headers
-
1 x USB 3.0/2.0 header
-
1 x serial port header
-
1 x Clear CMOS jumper
-
1 x Trusted Platform Module (TPM) header
|
Back Panel Connectors |
-
1 x PS/2 keyboard/mouse port
-
1 x optical S/PDIF Out connector
-
1 x coaxial S/PDIF Out connector
-
8 x USB 2.0/1.1 ports
-
2 x USB 3.0/2.0 ports
-
2 x eSATA 6Gb/s connectors
-
1 x RJ-45 port
-
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
|
I/O Controller |
-
iTE IT8728 chip
|
H/W Monitoring |
-
System voltage detection
-
CPU/System temperature detection
-
CPU/System fan speed detection
-
CPU overheating warning
-
CPU/System fan fail warning
-
CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
|
BIOS |
-
2 x 64 Mbit flash
-
Use of licensed AMI EFI BIOS
-
Support for DualBIOS™
-
PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
|
Unique Features |
-
Support for @BIOS
-
Support for Q-Flash
-
Support for Xpress BIOS Rescue
-
Support for Download Center
-
Support for Xpress Install
-
Support for Xpress Recovery2
-
Support for EasyTune
* Available functions in EasyTune may differ by motherboard model.
-
Support for Smart 6™
-
Support for eXtreme Hard Drive (X.H.D)
-
Support for ON/OFF Charge
-
Support for Cloud OC
-
Support for 3TB+ Unlock
-
Support for TouchBIOS
-
Support for Q-Share
|
Bundle Software |
-
Norton Internet Security (OEM version)
|
Operating System |
-
Support for Microsoft® Windows 7/Vista/XP
|
Form Factor |
-
ATX Form Factor; 30.5cm x 24.4cm
|
Remark |
-
Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
-
Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.
|