CPU |
-
Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium® processors/ Intel® Celeron® processors in the LGA1151 package
-
L3 cache varies with CPU
(Please refer "CPU Support List" for more information.) |
Chipset |
-
Intel® Z170 Express Chipset
|
Memory |
-
4 x DDR4 DIMM sockets supporting up to 64 GB of system memory
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
-
Dual channel memory architecture
-
Support for DDR4 3866(O.C)/3733(O.C)/3666(O.C) /3600(O.C.) /3466(O.C.) /3400(O.C.) /3333(O.C.) /3300(O.C.) /3200(O.C.) /3000(O.C.) /2800(O.C.) /2666(O.C.) /2400(O.C.) /2133 MHz memory modules
-
Support for ECC UDIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
-
Support for non-ECC UDIMM 1Rx8/2Rx8/1Rx16 memory modules
-
Support for Extreme Memory Profile (XMP) memory modules
(Please refer "Memory Support List" for more information.) |
Onboard Graphics |
Integrated Graphics Processor+MegaChips MCDP2800 chip:
-
1 x HDMI 2.0 port
Requires the latest Intel® Graphic Driver from GIGABYTE website.
Maximum shared memory of 512 MB |
Audio |
-
Creative® Sound Core 3D chip
-
2 x JRC NJM2114 and 1 x TI Burr Brown® OPA2134 operational amplifiers
-
Support for Sound Blaster Recon3Di
-
High Definition Audio
-
2/5.1-channel
-
Support for S/PDIF Out
|
LAN |
-
2 x Killer E2400 chips (10/100/1000 Mbit)
* Teaming is not supported.
|
Wireless Communication module |
-
Killer™ Wireless-AC 1535
-
Wi-Fi 802.11 a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band
-
Bluetooth 4.1
-
Support for 11ac wireless standard and up to 867 Mbps data rate
* Actual data rate may vary depending on environment and equipment.
|
Expansion Slots |
-
2 x PCI Express 3.0 x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.
-
2 x PCI Express 3.0 x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
* The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the PCIEX8_2 slot with PCIEX16_2. The PCIEX16_1/PCIEX16_2 slot will operate at up to x8 mode when the PCIEX8_1/PCIEX8_2 is populated.
-
3 x PCI Express 2.0 x1 slots
|
Multi-Graphics Technology |
-
Support for NVIDIA® Quad-GPU SLI™ and 4-Way/3-Way/2-Way NVIDIA® SLI™ technologies
-
Support for AMD Quad-GPU CrossFireX™ and 4-Way/3-Way/2-Way AMD CrossFire™ technologies
|
Storage Interface |
Chipset:
-
2 x M.2 Socket 3 connectors (Socket 3, M key, type 2242/2260/2280 SATA & PCIe x4/x2/x1 SSD support)
-
3 x SATA Express connectors
-
6 x SATA 6Gb/s connectors (SATA3 0~5)
-
Support for RAID 0, RAID 1, RAID 5, and RAID 10
* Refer to "1-13 Internal Connectors," for the supported configurations with the M.2, SATA Express, and SATA connectors.
2 x ASMedia® ASM1061 chips:
-
4 x SATA 6Gb/s connectors (SATA3 6~7, GSATA3 8~9), supporting AHCI mode only
|
USB |
Chipset:
-
4 x USB 3.0/2.0 ports on the back panel
-
6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
Chipset+2 Renesas® USB 3.0 Hubs:
-
7 x USB 3.0/2.0 ports (3 ports on the back panel, 4 ports available through the internal USB headers)
Chipset+Intel® Thunderbolt™ 3 Controller:
-
1 x USB Type-C™ port on the back panel, with USB 3.1 support
-
1 x USB 3.1 Type-A port (red) on the back panel
|
Internal I/O Connectors |
-
1 x 24-pin ATX main power connector
-
1 x 8-pin ATX 12V power connector
-
1 x PCIe power connector
-
1 x I/O shield audio LED power connector
-
2 x M.2 Socket 3 connectors
-
3 x SATA Express connectors
-
10 x SATA 6Gb/s connectors
-
1 x CPU fan header
-
1 x water cooling fan header (CPU_OPT)
-
5 x system fan headers
-
1 x front panel header
-
1 x front panel audio header
-
2 x USB 3.0/2.0 headers
-
2 x USB 2.0/1.1 headers
-
1 x Trusted Platform Module (TPM) header
-
1 x Clear CMOS jumper
-
1 x power button
-
1 x reset button
-
1 x Clear CMOS button
-
1 x ECO button
-
1 x OC button
-
2 x audio gain control switches
-
2 x BIOS switches
-
Voltage Measurement Points
|
Back Panel Connectors |
-
1 x PS/2 keyboard/mouse port
-
1 x HDMI port
-
1 x USB Type-C™ port, with USB 3.1 support
-
1 x USB 3.1 Type-A port (red)
-
7 x USB 3.0/2.0 ports
-
2 x USB 2.0/1.1 ports
-
2 x RJ-45 ports
-
1 x optical S/PDIF Out connector
-
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In/Mic In, Line Out, Headphone)
-
2 x MMCX antenna connectors (2T2R)
|
I/O Controller |
-
iTE® I/O Controller Chip
|
H/W Monitoring |
-
System voltage detection
-
CPU/System/Chipset temperature detection
-
CPU/CPU OPT/System fan speed detection
-
CPU/System/Chipset overheating warning
-
CPU/CPU OPT/System fan fail warning
-
CPU/CPU OPT/System fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install.
|
BIOS |
-
2 x 128 Mbit flash
-
Use of licensed AMI UEFI BIOS
-
Support for DualBIOS™
-
Support for Q-Flash Plus
-
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
|
Unique Features |
-
Support for APP Center
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
3D OSD
@BIOS
Ambient LED
AutoGreen
Cloud Station
EasyTune
Easy RAID
Fast Boot
Smart TimeLock
Smart Keyboard
Smart Backup
System Information Viewer
USB Blocker
-
Support for Q-Flash
-
Support for Smart Switch
-
Support for Xpress Install
|
Bundle Software |
-
Norton® Internet Security (OEM version)
-
Intel® Smart Response Technology
|
Operating System |
-
Support for Windows 10/8.1 64-bit
-
Support for Windows 7 32-bit/64-bit
* Please download the "Windows USB Installation Tool" from GIGABYTE's website and install it before installing Windows 7.
|
Form Factor |
-
E-ATX Form Factor; 30.5cm x 26.4cm
|
Box Contents |
-
GA-Z170X-Gaming G1 motherboard
-
Motherboard driver disk
-
Wireless module driver disk
-
User's Manual
-
Quick Installation Guide
-
Six SATA cables
-
I/O Shield
-
One 2-Way SLI bridge connector
-
One 3-Way SLI bridge connector
-
One 4-Way SLI bridge connector
-
One 2-Way CrossFire bridge connector
-
One set of GC-USB3.1 BAY
-
One GC-M2-U2-MiniSAS
-
One G Connector
-
One Wi-Fi antenna
-
One Wi-Fi antenna retention cover
-
One pack of back I/O dust covers
|